HAND LAY-UP RESIN
Characteristics and instructions：
Universal resin has wide applicability, high universality, its glass fiber reinforced plastic products have good mechanical strength and high elongation rate, suitable for all kinds of hand paste molding ordinary glass fiber reinforced plastic products.
Item
|
Type
|
Viscosity(25℃ Pa.S)
|
Gel Time (25℃/min)
|
Non-volatile（%）
|
Application & Remarks
|
|
FX-191
|
Phthalate
|
0.30-0.60
|
7.0-13.0
|
56-65
|
Suitable for the production of semi transparent plate, ventilation pipe and all kinds of hand paste glass fiber reinforced plastic products.
|
|
FX-DA191
|
Phthalate
|
0.35-0.50
|
8.0-15.0
|
56-68
|
Fast curing, easy to mold release, strength and rigidity, suitable for the rapid release products.
|
|
FX-191B
|
Phthalate
|
0.20-0.40
|
8.0-15.0
|
56-65
|
Light color, fast curing, suitable for producing all kinds of ordinary glass fiber reinforced plastic products.
|
|
FX-DC191
|
DCPD
|
0.20-0.50
|
4.0-16.0
|
56-68
|
Low shrinkage, high strength, good comprehensive performance, very wide applicability.
|
|
FX-196
|
Phthalate
|
0.50-1.20
|
8.0-12.0
|
62-68
|
Phthalate universal resin,high strength, good heat resistance,excellent comprehensive performance.
|
|
FX-DC196
|
DCPD
|
0.50-1.20
|
8.0-12.0
|
62-68
|
DCPD universal resin,Low shrinkage,high strength, good impact resistance, low water absorption,wide applicability.
|
|
FX-DC197
|
DCPD
|
0.45-0.60
|
8.0-15.0
|
60-65
|
Suitable for products with corrosion resistance requirements.
|
|
FX-1001
|
Phthalate
|
0.30-0.45
|
9.0-16.0
|
62-68
|
With good mechanical strength and high elongation rate, suitable for all kinds of hand paste molding ordinary glass fiber reinforced plastic products.
|
|
FX-192APT
|
Phthalate
|
0.30-0.60
|
12-50
|
55-65
|
Universality,pre-accelerated thixotropic resin
|
Package and storage:
Net weight:220KG/DRUM. The storage period (below 25℃) is 3 months. Unsaturated polyester resin is a flammable liquid, should be stored at cool and ventilated place, far away from fire and heat source.
Notice:This information is based on the GB standard, since there are many variables in the production process, it is recommended that users need to tested before use. The company reserves the right to modify certain technical parameters.
