BUTTON RESIN
Characteristics and instructions：
After the button resin cured , the product has the characteristic of good transparency, low shrinkage, strong impact toughness, pearl-shine lined and so on. Mainly used in the manufacture of bar buttons and button plates.
|
Item
|
Appearance
|
Viscosity(25℃ Pa.S)
|
Gel Time (25℃/min)
|
Non-volatile（%）
|
Application & Remarks
|
|
FX-815N
|
Light cyan transparent liquid
|
0.90-1.20
|
10.0-15.0
|
58-68
|
After curing, the product has the characteristic of good transparency, strong impact toughness and so on. Suitable for the manufacture of button bar.
|
|
FX-816
|
Light cyan transparent liquid
|
0.90-1.20
|
4.0-10.0
|
60-70
|
After curing, the product has the characteristic of good transparency, strong impact toughness, pearl-shine lined and so on. Suitable for the manufacture of button plate.
|
|
FX-303
|
Light yellow transparent liquid
|
0.80-1.30
|
5.0-10.0
|
64-70
|
Curing exothermic peak is low, suitable for button crafts.
|
|
FX-888A
|
Light yellow transparent liquid
|
0.80-1.40
|
4.5-8.5
|
62-70
|
The rewind button resin
|
|
FX-888ET
|
Light yellow transparent liquid
|
0.80-1.40
|
4.2-7.8
|
60-68
|
The rewind button resin
|
|
FX-888TSA
|
Light yellow transparent liquid
|
0.75-1.30
|
3.1-5.8
|
60-68
|
Flower stick deduction resin
|
|
FX-2019
|
Light yellow transparent liquid
|
0.75-1.30
|
3.0-6.0
|
60-68
|
With good transparency, excellent strength and toughness and weather resistance, suitable for the production of pearl plates.
|
|
FX-C728
|
Flexible resin
|
0.17-0.29
|
10-19
|
60-68
|
Add into buttons resin, improve the toughness and impact strength of the crafts products.
|
Package and storage:
Net weight:220KG/DRUM. The storage period (below 25℃) is 3 months. Unsaturated polyester resin is a flammable liquid, should be stored at cool and ventilated place, far away from fire and heat source.
Notice:This information is based on the GB standard, since there are many variables in the production process, it is recommended that users need to tested before use. The company reserves the right to modify certain technical parameters.